ZMIVENTKIT8 Black Low Profile Motorised Turbo Roof Vent/Extractor Fan + LED Light
ZMIVENTKIT1 Low Profile Motorised Turbo Roof Vent/Extractor Fan 2
ZMIVENTKIT4 Low Profile Motorised Turbo Roof Vent/Extractor Fan 2
  • ZMIVENTKIT8 Black Low Profile Motorised Turbo Roof Vent/Extractor Fan + LED Light
  • ZMIVENTKIT1 Low Profile Motorised Turbo Roof Vent/Extractor Fan 2
  • ZMIVENTKIT4 Low Profile Motorised Turbo Roof Vent/Extractor Fan 2

Black 12v Low Profile Motorised Turbo Roof Air Vent & Extractor Fan + Internal Vent With LED Light

Product Ref: ZMIVENTKIT8

Dimensions: Height from roof: 64mm, External vent width: 312mm, External vent length: 385mm, Internal vent diameter: 300mm, Internal vent depth: 30mm (When open)

Cross Reference: 02-2200-ZW

£137.75 inc VAT£114.79 ex VAT

In Stock

Features

12v Low profile motorised turbo Roof Vent/Extractor fan in black. ideal for use on caravans/light commercial vehicles/animal transport i.e. dog vans

Complete with white internal vent which can be opened and closed with a bult in LED light

Fan can draw air in and extract with the switch provided

24v version also available, see related products

NOTE 1: The fan and the internal vent do not attach together, the fan is attached to the roof outside the vehicle and the internal vent is screwed to the roof lining. This particular internal vent with the LED light is designed for vehicle with a roof lining and requires a 35mm gap between roof and lining (see schematic drawing). If your vehicle doesn't have a roof lining or is too shallow then it will be necessary to build a small infill with plywood or similar and will require sealing with silicone

​NOTE 2: The fan is designed for flat roofs. It can be fitted to ridged roofs but the gaps will have to be filled with a suitable material and sealant. Pleas ensure your installer is capable of this

Technical Information

  • Fan will suck & blow with supplied switch
  • Supplied with installation & switch wiring instructions
  • Complete with closeable white internal vent with built in 2 function white/blue LED light and 2 way illuminating fan switch switch (illuminates RED when active)
  • Low profile, aerodynamic design
  • Robust construction
  • European made not cheap chinese copy
  • Complete with rubber roof seal
  • Non-Corrosive
  • 2600 RPM
  • 850 m3/h Air flow
  • 80 Watt
  • 7A Draw
  • 52dB Noise level
  • 230mm Diameter hole required in roof
  • 80°C Max operating temperature

Wiring

  • Black = Negative
  • White = Half Brightness
  • Red = Full brightness
  • Blue = Blue light

If bonding the fan to the roof Sikaflex EBT+ sealant is recommended

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK